Guides
Replace the glass, or the whole enclosure.
When a single panel can be replaced, when the hardware can stay, and when the right answer is a new enclosure.
Call or text (208) 286-1285 for a ballpark from a photo.
Green tile, arched alcoveGLASS23
One panel
If a single panel cracked or etched and the hardware is sound, we can usually replace that panel alone. The new glass is cut to the opening as it is today, not copied from the old panel, because the room may have moved.
Keep the hardware
Solid brass hinges and clamps from a good frameless enclosure often outlast the glass. If the finish is still good and parts are available, they can carry new glass. Plated hardware that has pitted or a header that has corroded should go.
When it is a new enclosure
If the original layout was wrong, with the door swinging into a fixture, a panel too short to stop the spray, or no slope back to the drain, replacing the glass repeats the problem. If the frame on a framed door has corroded, the frame is the problem and the whole unit comes out. We will tell you which one you have from the photo.
Etched glass
If the cloudiness does not come off with a hard-water cleaner, the surface is etched and there is no repair. That is a new panel. The time to add a coating is when the new panel is ordered.
More guides
Questions we get.
Can you match my existing glass?
Clear and low-iron glass match across manufacturers. Pattern glass may not, depending on the pattern and its age.
Do I need to be home for a repair?
Yes. Most repairs are short and we go through the door with you before leaving.
Will a new panel fit old hardware?
Usually, if the hardware is in good condition and we can source matching parts. We check before ordering.
Recent work.
Send a photo.
Get a number.
Text (208) 286-1285 a photo of the space with a rough width and height, or use the form. We come back with a ballpark, then measure and send a written proposal. We will beat a comparable quote more often than not; send it over and ask.