Guides
Low-iron vs clear glass.
Why standard glass looks green at the edge, what low-iron Starphire does about it, and when it is worth paying for.
Call or text (208) 286-1285 for a ballpark from a photo.
Green tile, arched alcoveGLASS23
Why clear glass is green
Ordinary float glass has iron in it, and iron tints glass green. Head-on through a 3/8 inch panel it is subtle. At the exposed edge, where you are looking through several inches of glass, it is obvious. Across a wide panel it tints whatever sits behind it, which on white tile means the tile looks faintly green.
What low-iron does
Low-iron glass, sold as Starphire and under other names, has most of the iron removed. The edge reads nearly colorless and the tile behind the panel keeps its color. Same thickness, same tempering, same hardware, same coatings.
When it is worth it
White or pale tile. Marble, quartzite and other light stone. Wide panels with a lot of exposed edge. Steam enclosures, because there is so much glass. Any bathroom where you chose the tile for its color.
When it is not
Mid-tone or dark tile in a standard alcove. Small panels. Anywhere you cannot see the difference when we hold the two samples against your wall, which is a test we do at every measure.
More guides
Questions we get.
How much more does low-iron cost?
More per square foot than clear, less than people expect. Send a photo for a ballpark on both.
Can I get low-iron in satin etch?
Yes. Low-iron satin etch is whiter than standard etch, which matters on a white bathroom.
Does low-iron show water spots more?
Spots show the same on both. Low-iron shows the color of the tile behind it more accurately, that is the only visual difference.
Recent work.
Send a photo.
Get a number.
Text (208) 286-1285 a photo of the space with a rough width and height, or use the form. We come back with a ballpark, then measure and send a written proposal. We will beat a comparable quote more often than not; send it over and ask.